ePDF PS version 30.800 (beta - usage at your own risc!)


ATTENTION:

This drivers will change all of your existing IBM PS drivers 
to version 30.797, because all of drivers are using the same 
base files. Its not possible to install two different versions 
of PS drivers side by side.
Vice versa an PS driver installation AFTER the "ePDF PS" 
installation will up- or downgrade the PS print subsystem to 
the level of the new installed driver. In most cases "ePDF PS" 
will not longer work after such a change. It needs the right 
PS print subsystem which with it was distributed. 

To print over network connections we recommend the same PS driver 
level on client and server.

Please keep this in mind, if you want to change your system!


"ePDF PS" is a driver to generate PostScript files.
It can be used for ePDF to generate Postcript files,
which will conversed to PDF.

(Note: "ePDF PS" is not the same like "ePDF". ePDF is an application,
a frontend for GhostScript to create PDF files. But "ePDF PS" is
a printer driver.)

Its based on the "Generic PostScript Driver" from IBM.

This driver will produce quite 'clean' postscript code without 
non-standard (device specific) postscript code, 
resolutions from 72 to 4000 dpi, and page sizes up to A0.

If anybody needs a special page size, differently 
from standards like letter, ISO or DIN formats, send us 
an email. We will add the obversely size.


Update information:

Please delete previous installed versions of "ePDF PS".
Delete the printer object and then delete the file
X:\os2\dll\pscript\auxprint.pak (X is your bootdrive)


Installation:

Unpack the files to a directory of your choice.
Install the driver using a standard os/2 procedure
E.g. you can drop a printer template to your desktop.
Select 'other drivers from disk', and enter the 
location of the driver files. Follow the online 
instructions.
The easiest way is to open the "pscript.drv" via
double clicking on WPS folder, and the drop the 
"ePDF PS" to a location of your choice.


****** ATTENTION*****************************
Please check the presents of an auxprint.pak in
X:\os2\dll\pscript (X is your bootdrive).
If there already is an other auxprint.pak file, and 
this file is not from a previous version of "ePDF PS",
don't overwrite this file! In this case contact us,
before going on with installation.
Overwriting of existing auxprint.pak can damage 
other printer objects!
After installation please check the auxprint.pak
again. If it was not copied from your the ePDF PS 
archive to X:\os2\dll\pscript, you must copy it
manually.
*********************************************


If you have problems with printing, enable 
"Overwrite forms mismatch" (under options in printer 
driver settings).

There are some known problems with page size A0.

Refere the ePDF readme file for more information how
to launch ePDF automatically after postscript creation
using Printmon PS.

ePDF is a tool to converse PostScript to PDF files, 
which uses Ghostscript as backend. Get more information 
from http://www.subsys.de/ePDF/

For bugreports join the mailing list. Send a message with
the word SUBSCRIBE in the subject line of your mail to
ePDF@subsys.de.



License

The postscript drivers are copyrighted by IBM.

Look at the readme file:

OS/2 PRINT SUBSYSTEM PRINTER DRIVER - PSCRIPT
FOR OS/2 WARP 4.00 OR ABOVE

IMPORTANT
---------
PLEASE READ THE FOLLOWING TERMS AND CONDITIONS. DOWNLOADING
THE DRIVER PACKAGE THAT FOLLOWS, INDICATES YOUR ACCEPTANCE 
OF THE FOLLOWING TERMS AND CONDITIONS:

- YOU MUST BE, AND YOU AGREE THAT YOU ARE, A PRIOR LICENSE OF OS/2
  WARP VERSION 4.00 OR ABOVE
- YOU MAY MAKE COPIES OF THE OS/2 WARP VERSION 4.00 SERVICE FIX EQUAL TO
  THE NUMBER OF LICENSED COPIES OF OS/2 WARP VERSION 4.00 YOU POSSESS
- YOU MAY ONLY USE THIS DRIVER PACKAGE FOR MAINTENANCE PURPOSES
- ALL OTHER TERMS AND CONDITIONS OF YOUR OS/2 WARP VERSION 4.00 LICENSE
  AGREEMENT APPLY TO THIS DRIVER PACKAGE; HOWEVER, THIS DOES NOT EXTEND
  ANY WARRANTY OUTLINED IN SUCH AGREEMENT.


The extension of the IBM driver called "ePDF PS" is emailware.

We allow you to use and distribute this files under 
the condition that we are in no way responsible for any damage 
or loss you may suffer,  and you aggree to the above listed
copyright statements of IBM.

Another condition for use of this program is you must send 
us an E-Mail stating that you are using the program. It is 
important for us to see how many people are using the program 
so that we may determine the usefullness of continuing this 
project into the future.

Otherwise you can support us by helping to make documentions of 
subsys software in other languages than german. Please contact us 
if you have time and delight to work together.


history
v30.800
- using latest ps printer drivers from IBM (v30.800)
- new page sizes Dia and 8 x 11 (for presentations)

v07
- using latest ps printer drivers from IBM (v30.797)

v06
- using latest ps printer drivers from IBM (v30.792)


v05
- corrected page sizes
- set PS level from 3 to 2

v04
- changed epdf.txt

v03
- archiv now includes all pscript drivers from IBM,
english, latest version (30.783)


v02
- ePDF icon removed, because all other installed
postscript drivers got this icon.
- readme.txt extended

v01
first version



F. Wochatz

Berlin, 12.02.2004

